Concrete Garage Floor Replacement in Surrey

Coastal Concrete. Built to Last. One crew handles your entire garage floor project, from demolition and excavation through reinforcement and finishing. No subcontractors, no scheduling gaps.

  • Combined concrete and excavation under one company
  • Over 15 years of excavation experience
Garage floors · Services

Why patching a failing garage floor doesn’t work

Fresh garage pad poured inside timber forms

The overlay problem

Many homeowners try to save money by applying a thin overlay or epoxy coating over cracked, sunken, or heaving garage concrete. The coating looks good for a few months, but the underlying slab keeps shifting because the real issue is below the surface. Without addressing a failed subgrade (the compacted gravel and soil beneath the concrete), any surface treatment will crack, peel, or delaminate within a season or two. You end up paying twice. Full replacement with proper Gravel Base Preparation & Soil Compaction is the only approach that addresses the root cause and delivers a floor that holds up for decades.

Power trowel finishing a large covered concrete slab

Complete Old Concrete Removal & Demolition (Re & Re Services)

Our crew breaks out and removes the entire damaged slab, including rebar, wire mesh, and debris. Because we operate our own excavation equipment, there’s no waiting for a separate demolition contractor. We haul away all material and leave a clean site ready for base work. This integrated approach cuts days off a typical garage floor project.

Hand float resting on freshly placed concrete

New slab with Steel Reinforcement & Rebar Installation

After excavation and Gravel Base Preparation & Soil Compaction, we install Steel Reinforcement & Rebar Installation sized for garage loads, then pour and finish your new floor. You choose the finish: Broom Finish Concrete for traction, Smooth Finish Concrete for a clean look, or Exposed Aggregate Finishes for added durability and style. Every step happens under one crew, managed directly by Obada and his brothers.

Garage floors · Process

How we replace your garage floor from start to finish

Every Concrete Garage Floor Replacement follows a structured process. One crew manages every phase, so there are no handoff delays between trades.

  1. 01

    On-site assessment

    Obada inspects the existing slab, evaluates the subgrade condition, and provides a detailed written estimate.

  2. 02

    Demolition and removal

    Our crew breaks out the old concrete using our own equipment, including tight-access micro mini excavation for narrow garage entries.

  3. 03

    Excavation & Site Preparation

    We excavate to the correct depth, remove unsuitable soil, and grade the subgrade to proper drainage specifications.

  4. 04

    Gravel Base Preparation & Soil Compaction

    A compacted gravel base is installed and machine-compacted to prevent future settling or heaving.

  5. 05

    Form Work & Custom Formwork plus reinforcement

    We set forms to the correct elevation and install Steel Reinforcement & Rebar Installation for structural integrity.

  6. 06

    Pour and finish

    Fresh concrete is placed, levelled, and finished to your chosen specification. You receive progress photos throughout the day.

Garage floors · Decision guide

Is full garage floor replacement right for your situation

Not every garage floor needs full replacement. Here’s how to tell whether your slab calls for a complete re-pour or a simpler repair.

Depth and pattern of cracking
surface-only versus full-depth structural failure
Evidence of subgrade failure
sinking, heaving, or water pooling under the slab
History of previous repairs
repeated patch failures signal a deeper problem that only full replacement solves

When it fits

  • Large cracks that run through the full depth of the slab, not just surface hairlines
  • Sections of the floor have sunk, heaved, or become noticeably uneven, creating trip hazards or drainage problems
  • Previous patch jobs or overlays have already failed, indicating the subgrade beneath the concrete is compromised

When it may not

  • Minor surface hairline cracks with no movement or settling underneath
  • Cosmetic wear on an otherwise structurally sound slab that could benefit from a surface treatment

If your garage floor shows structural cracking, settlement, or repeated repair failures, full replacement with proper excavation, base compaction, and reinforcement is the only lasting solution.

Project gallery

Recent garage floor projects

Garage floors · FAQ

Garage floor replacement questions

How long does a garage floor replacement take?

Most residential garage floor replacements take three to five days from demolition to finished slab, depending on the size of the garage and the condition of the subgrade. Because our crew handles Old Concrete Removal & Demolition (Re & Re Services), Excavation & Site Preparation, and the new pour, there are no scheduling gaps between trades.

Can I just pour new concrete over my old garage floor?

Pouring a thin layer over a damaged slab is one of the most common mistakes homeowners make. The new layer bonds to the failing concrete beneath it, and as the old slab continues to crack or settle, the overlay fails with it. Full removal, proper Gravel Base Preparation & Soil Compaction, and a new reinforced pour are the only way to get a floor that lasts.

What finish options are available for a new garage floor?

We offer Broom Finish Concrete for slip resistance, Smooth Finish Concrete for a clean look, and Exposed Aggregate Finishes for added texture and durability. Coloured Concrete is also available if you want to match your home’s exterior or create a specific look.

Do you handle the demolition and excavation, or do I need to hire a separate contractor?

We handle everything in-house. Our crew has more than 15 years of excavation experience and operates specialized equipment, including a micro mini excavator and tracked dumper that fit through openings as narrow as four feet. No separate contractors are needed.

How much does a concrete garage floor replacement cost?

Costs depend on the size of the garage, the condition of the existing subgrade, and the finish you choose. Residential concrete projects in the Lower Mainland typically range from $8 to $35+ per square foot installed. We provide free on-site estimates with a detailed written breakdown so you know exactly what to expect before any work begins.

Confirm your garage floor replacement plan

If your garage floor is cracked, settled, or has already failed a previous repair, full replacement is the right call. Obada and his crew handle every phase of the project under one company, from demolition through finishing. Call us or fill out the form to book your free on-site assessment.

Book a free concrete consultation

Please enter your name.
Please enter a 10-digit phone number.
Please enter a valid email.

Your data is protected under PIPEDA. We never share your information with third parties. View our Privacy Policy for details.

Thanks, we’ve got your details.

Obada will be in touch shortly.